Comms Guide · Deep dive
LoRa Mesh: Meshtastic vs MeshCore
Off-grid texting with no license, no towers and no monthly fee. Here's how the two systems differ and how to set one up.
What LoRa mesh is
Small low-power radios send short texts and GPS positions, hopping from radio to radio until they arrive. Your phone connects to your radio over Bluetooth, with no internet or cell service.
- No license. In the US it runs on the unlicensed 902–928 MHz band.
- Text only. Default speed is about 1 kbps — fine for short messages, not voice.
- Range comes from height and relays. Best-case line of sight is 10 km or more per hop; at ground level, expect far less.
Meshtastic vs MeshCore
Both run on the same radios, but they can't talk to each other. Pick the one your local group uses.
| Meshtastic | MeshCore | |
|---|---|---|
| Who relays | Most radios help relay by default | Only repeaters relay; phones-paired radios don't |
| Max hops | 3 by default, up to 7 | Up to 64 |
| Direct messages | Managed flooding | Learns a path after the first message |
| Best for | Quick group setup, events, tracking | Planned networks with fixed repeaters |
| Message history | Only while your radio was on | Room servers hold missed posts |
| Community size | Larger; more local meshes and guides | Smaller but growing |
Meshtastic
- Strength: every radio pitches in. Toss a few in a pack and you have a mesh.
- Weakness: messages stop after 3 hops by default (7 max), and busy meshes get crowded.
MeshCore
- Strength: only repeaters relay, and direct messages learn a route, so big networks stay quieter. Up to 64 hops.
- Strength: room servers store posts so you can catch up later.
- Weakness: handheld radios don't relay, so you need at least one repeater. Group channels still flood.
How it fits your comms plan
Mesh is a strong text layer, not a replacement for voice radio.
| Layer | License | Range | Voice | Works grid-down | Cost |
|---|---|---|---|---|---|
| LoRa mesh | None | Miles per hop; grows with relays | No — text and GPS only | Yes, on batteries/solar | $35–$140 |
| FRS / GMRS | GMRS: $35, no test | 1–5+ mi; repeaters farther | Yes | Yes; repeaters need power | $40–$200 |
| Ham | Exam required | Local to worldwide (HF) | Yes, plus digital | Yes, with your own power | $30–$1,000+ |
| Cell PTT (SkyCom) | Service plan | Nationwide while towers work | Yes | No — needs towers | $299–$399 + plan |
| Satellite texting | Subscription | Global, sky view | Mostly text | Yes | Device + plan |
- Beats GMRS and ham at: silent texting, GPS tracking of your group, weeks of battery life and no license.
- Loses to them at: voice, urgency and simplicity. A radio call is faster in an emergency.
- Beats cell PTT at: working with towers down. Loses at: nationwide reach.
- Beats satellite at: no subscription. Loses at: reach beyond your local mesh.
Details on each layer are in the Comms Guide and GMRS guide.
First setup
- 1
Attach the antenna first
Always, before powering on. Use a 915 MHz antenna.
- 2
Flash the firmware
Open the web flasher in Chrome or Edge, plug in by USB with a data cable, pick your board and install.
Meshtastic flasherMeshCore flasher - 3
Install the app and pair
Both have Android, iOS and web apps. Pair over Bluetooth using the code on the screen.
- 4
Set your region
Meshtastic: set region to US. Leave the preset on LongFast unless your local mesh uses another.
- 5
Pick your role
Meshtastic: keep CLIENT (or CLIENT_MUTE for a radio that shouldn't relay). MeshCore: flash Companion firmware for your carry radio and Repeater firmware for a fixed relay.
- 6
Make a private channel
The default channel is readable by anyone. Create a channel with a new key and share it with your group by QR code.
Going further
Antennas and height
Height beats everything. A radio in an upstairs window or on a pole reaches much farther than one on your belt. Match the antenna to 915 MHz and the right connector; ignore big gain claims. Check your coverage with the Meshtastic site planner.
Solar repeaters
One solar repeater on a roof or hill links the whole group. Meshtastic: use CLIENT unless your local mesh asks for a router role. MeshCore: flash Repeater firmware; it's required for handhelds to reach each other past direct range.
Privacy
- Use a private channel key for anything personal.
- Ham operators can switch on licensed mode, but it sends everything unencrypted.
Starter radios
A good start: two carry radios for your household and one solar repeater up high. "Both" runs Meshtastic or MeshCore.
Carry radios
Repeaters and builds
Buy the 915 MHz version for the US. PrepFindr earns a commission on some sales. Prices change; check the listing.
Sources
These are the published documents behind the thresholds on this page. We quote them rather than linking out — search the document name and publisher to read the current edition yourself, and follow that edition if it differs from what you read here.
Meshtastic, Getting started, overview, LoRa config, device roles, encryption, antennas, flasher
US band, hops, roles, default channel key, antenna safety.
MeshCore, FAQ, website and GitHub issue #1404
Repeater-only relaying, path routing, 64 hops, room servers, no interoperability.
Code of Federal Regulations, 47 CFR 15.247
Unlicensed 902–928 MHz operation.


